AII6000A is an automatic oxygen respiration device (short-term ventilator) with additional inhalation facility.
You can use AII6000A:
 To revive patients at the site of the emergency;
 For longer periods in more protracted emergencies, e.g. fires;  For short-term O2 inhalation using a respiration masks.
You can use AII6000A while transporting patients:
 Between the various rooms and departments of a hospital;  Between the hospital and other premises;
 In emergencies;
 When transport over considerable distances is planned.
AII6000A:
 Is designed to provide controlled ventilation to persons of 10kg body weight or more;
 Is used to treat respiratory arrest;
 Can be preset to parameters that ensure evenly balanced ventilation, provided that the selected Maximum ventilation pressure Pmax is not exceeded.
 Permits respiration-controlled oxygen inhalation in Demand mode. 2.2 Ventilation function
AII6000A operates within a pressure range of 2.7 to 6 bar and at a flow rate of not less than 70l/min O2. It has a built-in power pack.
It uses high-pressure, medicinal-grade oxygen. An external pressure reducer brings this down to the required operating pressure. The oxygen supply is fed in at input valve 10.
The ventilation settings are continuously variable. These settings (frequency and volume per minute are coupled) and the inspiration/expiration ratio of 1:1.67 are regulated by internal electronic control mechanisms.
The gas for inspiration flows along the hose and through the patient valve and either the mask or tube into the patient’s airways. The patient valve is fitted with a one-way valve membrane that enables expired gas to be conducted away through the outlet.